Drivers over temp

Building your RailCore and having questions or issues?

Topic author
PWRMAD
Posts: 1
Joined: Sun Apr 07, 2019 9:17 pm

Drivers over temp

Post by PWRMAD » Sun Apr 07, 2019 9:24 pm

Hi all

I have finished my build and I am in the testing phase. I am getting some over temp warnings the do not make sense to me because some of the drivers that are alarming are not used. Any ideas would be greatly appreciated. I am running version 2.02(RTOS) (2018-12-24b1)

9:17:23 PM
Error: over temperature shutdown reported by driver(s) 5 9:02:23 PM
Warning: high temperature reported by driver(s) 6 8:17:24 PM
Warning: high temperature reported by driver(s) 4 8:07:11 PM
Error: over temperature shutdown reported by driver(s) 1 8:06:30 PM
Error: over temperature shutdown reported by driver(s) 7 8:05:41 PM
Warning: high temperature reported by driver(s) 7 8:04:18 PM
Error: over temperature shutdown reported by driver(s) 6 8:03:34 PM
Warning: high temperature reported by driver(s) 0 8:02:04 PM
Error: over temperature shutdown reported by driver(s) 9 7:59:49 PM
Error: over temperature shutdown reported by driver(s) 5

Thanks again
Randy :(




PlasticMetal
Posts: 33
Joined: Mon Nov 19, 2018 12:21 am
Printer Variant: RailCore II 300ZL
Has thanked: 2 times
Been thanked: 5 times

Post by PlasticMetal » Tue Apr 09, 2019 10:18 pm

Unfortunately, I haven't got any answers for you, but my suggestion would be to post this question on the Duet forum, if you haven't already.


kraegar
Posts: 36
Joined: Mon Sep 17, 2018 9:37 pm
Printer Variant: RailCore IIZL
Has thanked: 1 time
Been thanked: 4 times

Post by kraegar » Fri Apr 19, 2019 2:52 pm

That's... bizarre. I'd definitely check with the duet guys. Let us know what you find out!

Post Reply